Inner Barrels for Gas & CO2

The inner barrel guides the BB from the hop-up and out of the pistol, and it is one of the most direct upgrades on a gas-powered airsoft pistol. This category gathers inner barrels for GBB pistols – whether the pistol runs on gas or CO2, it is the model, barrel length and hop-up chamber that decide which barrel fits.

The inner barrel guides the BB from the hop-up and out of the pistol, and it is one of the most direct upgrades on a gas-powered airsoft pistol. This category gathers inner barrels for GBB pistols – whether the pistol runs on gas or CO2, it is the model, barrel length and hop-up chamber that decide which barrel fits.

The largest selection comes from Maple Leaf: standard 6.02 mm barrels in lengths of 86, 97, 113, 144 and 180 mm, Crazy Jet barrels in 86, 97 and 113 mm, and hop-up upgrade kits with 80 or 100 mm barrels and High-effect Valve for Tokyo Marui and WE's G-series. PDI makes model-specific 6.01 mm barrels for the TM Hi-Capa 4.3 (palsonite, tolerance ±0.01 mm), TM M9A1, TM FN5-7 and XDM40, among others. ZC Airsoft has 6.02 mm barrels in 83.7, 95.7, 106 and 112.4 mm, while Archwick has 6.03 mm brass barrels in 97 and 113 mm. There are also Air Track barrels from Poseidon Airsoft in 100 and 113 mm for Marui and WE pistols, a 112 mm barrel from Madbull for the WE M1911, 6.01 mm barrels from A2 Airsoft and Addicted 2 Airsoft (including for Tanfoglio) and a 6.04 mm barrel for the TM and KJW M9/M92.

What to look for

  • Length: The barrel must be the same length as the original. Measure your current barrel or check the manual – several product descriptions also list models; according to the manufacturer, the Maple Leaf 97 mm fits the G17, G18, Hi-Capa, P226, PX4C and XDM 3.8, among others.
  • Inner diameter: A 6.01 mm tightbore barrel leaves less air around the BB, which can give more consistent shots. Barrels of 6.02–6.04 mm are more forgiving of BB quality and dirt.
  • Model-specific or universal: Some barrels are made for one specific model, e.g. M9/M92, FN5-7 or Hi-Capa 4.3. Others are listed by length and fit several pistols. Choose model-specific if your pistol has a special barrel or hop-up design.
  • Hop-up: The barrel must fit your hop-up chamber. When you change barrels, it is a good opportunity to look at the hop-up bucking too, so the two parts work together.

Who it suits

For players who want more consistent shots from their gas pistol, or who need to replace a worn or damaged barrel. If you are unsure about length or fit, our workshop in Aulum, Denmark, can help you find and fit the right barrel.

See also hop-up and hop-up buckings for gas & CO2, valves and gas routers and spare parts and upgrades for gas guns.

Quick guide Which inner barrel fits your gas or CO2 pistol?

The barrel must be the same length as the original and fit the hop-up chamber. CO2 blowback pistols use the same barrels as the gas version. If in doubt, measure your old barrel.

  • 85–86 mm VFC/Umarex Glock 19 and 19X · WE G19G Series
  • 95 mm Tokyo Marui Hi-Capa 4.3Hi-Capa
  • 97 mm Tokyo Marui Glock 17, 18C and P226 · WE G17 and G18G Series
  • 100–101 mm Tokyo Marui XDM-40, HK45 and FN 5-7
  • 106–115 mm Tokyo Marui M92F (106 mm) and M9A1 (115 mm)M9 & M92
  • 112.5–113 mm Hi-Capa 5.1 and M1911Hi-CapaM1911
  • 129–200 mm Action Army AAP-01 · 129 mm stock length, longer with an extended outer barrelAAP-01
  • 410 mm WE GBB M4 and HK416GBB rifles
Read the full guideInner barrels and hop-up buckings for gas pistols (GBB): lengths and choices
Filter and sort 30 products
Sort by

Need help choosing?

We play ourselves and are happy to help. Visit our shop in Aulum, Denmark, and try the airsoft guns on our 7 m test range – or send us a message.