Our workshop in Aulum, Denmark

Service, tuning og reparation

Vores eget værksted med erfarne teknikere, der brænder for airsoft. Uanset om dit våben skal repareres, opgraderes, nedgraderes eller have en grundig service, finder vi løsningen, der passer til dig og dit udstyr.

  • AEG
  • Gas/CO2 GBB
  • Bolt Action
  • HPA
Call +45 97 47 31 78 Email us
1

Visit us in Aulum

If you live near Aulum, drop by with your gun. Our technician goes through it with you, you agree on the right solution together – and it is usually ready for collection within 2–3 weeks*.

Directions and opening hours →
2

Send it in

If you live further away, call or email us and we will guide you. You send the gun with GLS via our portal, and it goes straight into our system when it arrives – usually ready within 2–3 weeks*.

Contact us first →

* Special jobs may require external work, which can extend the turnaround time.

Service prices

We recommend a service at least once a year – especially after the winter break.

AEG – Standard serviceThe gearbox is opened, and the internals and compression parts are checked, cleaned and thoroughly lubricated.
DKK 350 + parts
AEG – Deluxe serviceEverything in the standard service, plus optimal gear shimming, and the hop-up and barrel are stripped and checked for maximum performance and accuracy.
DKK 450 + parts
Gas/CO2 GBB pistol – Standard serviceSlide and barrel are stripped and cleaned, the lower is function-checked, and the pistol is lubricated and reassembled.
DKK 250 + parts
Gas/CO2 GBB pistol – Deluxe serviceEverything in the standard service, plus a hop-up check, every part cleaned individually and a thorough lubrication.
DKK 400 + parts
Bolt Action – ServiceThe mechanism is stripped, checked and lubricated, the barrel and hop-up are checked for wear, and everything is reassembled.
DKK 350 + parts
HPA – ServiceThe HPA unit is stripped, valves and O-rings are cleaned and lubricated, the gearbox is correctly fitted and the hop-up is checked. The whole gun is tested before handover.
DKK 400

Upgrades

Ready for the next level? We go through what you want to achieve, put together a parts list within your budget and give you an estimated price and timeframe.

350 kr./time + reservedele

Read about upgrades on Airsoftpedia →

Downgrades

Is your gun shooting too hot for your favourite site? We fit a new spring so it hits exactly the joule limit the site requires – and you can get closer without hammering your opponents.

Try the joule calculator →

Book or ask about the workshop

Call +45 97 47 31 78 or email support@handelshusetaulum.dk – and we will quickly work out what your gun needs.

Call +45 97 47 31 78support@handelshusetaulum.dk

Airsoft explained by Hank

This is what the workshop works on every day – explained in under two minutes per video.

AEG explained #1 – gear set, motor and spring 1:18
Airsoft explained AEG explained #1 – gear set, motor and spring What determines how an AEG shoots – and why gears, motor and spring have to match.
AEG explained #2 – high speed: gears or motor? 1:25
Airsoft explained AEG explained #2 – high speed: gears or motor? A higher rate of fire with faster gears or a stronger motor – and what AOE and latch mean for a high-speed build.
AEG explained #3 – MOSFET and ETU 1:36
Airsoft explained AEG explained #3 – MOSFET and ETU What a MOSFET or ETU does in your AEG, and when it is worth fitting one.
AEG explained #4 – brushed or brushless motor 1:24
Airsoft explained AEG explained #4 – brushed or brushless motor The difference between a conventional brushed motor and a brushless one – and what you gain by switching.
AEG explained #5 – measure m/s after fitting 1:23
Airsoft explained AEG explained #5 – measure m/s after fitting Why new parts can change BB velocity – and how a chronograph measures m/s, so you stay within the field limits.
AEG explained #6 – sniper: the spring is not everything 1:24
Airsoft explained AEG explained #6 – sniper: the spring is not everything Sear, air seal and hop-up – why a stronger spring on its own does not make a sniper rifle better.
Airsoft explained #7 – gas pistol (GBB) 1:15
Airsoft explained Airsoft explained #7 – gas pistol (GBB) How blowback works: the magazine valve, gas router and nozzle – and why magazines should be stored with a little gas in them.
Airsoft explained #8 – HPA 1:27
Airsoft explained Airsoft explained #8 – HPA Airsoft on compressed air: tank, regulator, line and engine – and why you should always check with a chronograph after adjusting.

Book the workshop

Fill in the form and we will open a case and get back to you by email with a price and the next steps.

  1. Fill in the formTell us what needs doing and which gun it is.
  2. We open a caseYou will hear from us by email once the case is open, and if we need more information.
  3. Hand in the gunDrop it off at our shop in Aulum, Denmark, or send it to us. Remember the magazine and battery if the fault involves them.
  4. We get to workDen normale behandlingstid er 2–3 uger. Vi giver besked, når våbnet er klar til afhentning eller afsendelse.

Bought a faulty item from us? You are welcome to use the returns portal for warranty claims – or choose “Warranty claim” here and enter your order number.