Hi-Capa slide parts

The slide on a Hi-Capa holds the hop-up, inner barrel, blowback housing and recoil system – the parts that decide how the BB leaves the barrel and how the slide cycles after each shot. Here you will find hop-up buckings and hop-up chambers, guide rods, recoil springs and buffers, O-rings for the blowback housing, a valve, charging handles, a compensator, fibre optics and a mount base for a red dot sight.

The slide on a Hi-Capa holds the hop-up, inner barrel, blowback housing and recoil system – the parts that decide how the BB leaves the barrel and how the slide cycles after each shot. Here you will find hop-up buckings and hop-up chambers, guide rods, recoil springs and buffers, O-rings for the blowback housing, a valve, charging handles, a compensator, fibre optics and a mount base for a red dot sight.

Maple Leaf covers the hop-up buckings: standard buckings in 50, 60, 70, 75 and 80 degrees, the Delta 60° and the Decepticon and MR GBB buckings (also in silicone), which according to the manufacturer fit GBB guns with TM-spec hop-up. SHS has 70-degree buckings for TM pistols and the VSR-10. Dynamic Precision supplies the Type A charging handle in 7075 aluminium, which can be fitted on either the left or right side, Recoil Master and Speed Master springs, a steel hammer and 1.5 mm fibre optics. From CowCow Technology comes the 3L hop-up chamber in CNC-machined 7075 aluminium, the RM1 guide rod with two recoil springs, the RAW DL charging handle in 6061 aluminium, a recoil buffer set and O-rings for CowCow's blowback housing. There is also the T-Style compensator from MITA, the VeWa mount base from Victoptics, the IPSC charging handle from Armorer Works, screws for the AIP hop-up base and silicone oil from Waldo Customs.

What to look for

  • Compatibility: Most parts are made for the Tokyo Marui Hi-Capa. The Armorer Works charging handle only fits Armorer Works' own Hi-Capa pistols, and the AIP screws are for AIP's hop-up base. If you run a clone, check the product name before you order.
  • Hop-up bucking: The degree rating indicates the hardness of the bucking. If you want a bucking with its own internal design, the Decepticon and MR with concave nub and included C-clip are the alternative to the standard buckings.
  • Recoil and cycling: The Recoil Master is made to give a more noticeable kick, while the Speed Master gives less recoil and more control. The RM1 guide rod and the CowCow buffer set work in the same area, so choose based on whether you want more kick or a calmer slide.
  • Fibre optics and sights: The fibre must fit the hole in your sight – the Dynamic Precision rods here are 1.5 mm in diameter and 60 mm long. The VeWa base is for Vector/Victoptics and Doctor sights.
  • Thread: The MITA T-Style compensator has a 14 mm CCW thread and requires a barrel or adapter with the same thread.

Who it's for

For the Hi-Capa owner who wants to tune the hop-up and cycling, replace wear parts or give the slide a personal look. If you would like the parts fitted, our workshop in Aulum, Denmark can help.

Find more parts under Hi-Capa receiver parts, Hi-Capa grip parts and Hi-Capa upgrades.

Filter and sort 32 products
Sort by

Need help choosing?

We play ourselves and are happy to help. Visit our shop in Aulum, Denmark, and try the airsoft guns on our 7 m test range – or send us a message.