Best Fittings Fill Kit DIN 200/300 bar

The Best Fittings Fill Kit DIN 200/300 bar is used to fill your PCP air gun directly from a scuba tank or compressed air cylinder with a DIN connection. The kit fits both 200 bar and 300 bar cylinder valves, so you can use the same fill kit whichever cylinder you have.

The fill kit has a clear pressure gauge, an easy-to-use push-button bleed valve and a 1000 mm microbore hose with a 1/8" BSP internal (female) thread. This means you can screw your fill probe with a 1/8" BSP external (male) thread directly onto the hose.

Fill your PCP from a cylinder

A fill kit is the link between the cylinder and the rifle – and it needs to be easy to read and operate while under pressure.

• DIN 200/300 bar: Fits both 200 bar and 300 bar cylinder valves with a DIN connection.
• Clear pressure gauge: Makes it easy to keep an eye on the pressure while filling, so you do not overfill the rifle.
• Quick push-button bleed: The push button releases the air from the hose quickly. The supplier highlights that this is particularly useful for rifles where the internal valve does not close when an ordinary fill kit is used.
• 1000 mm microbore hose: The long hose gives plenty of freedom to position the rifle while filling.
• 1/8" BSP connection: The hose has a 1/8" BSP female thread, so most fill probes with a 1/8" BSP male thread can be screwed straight on.

Maintenance and safety
Always fill slowly and watch the pressure gauge so you do not exceed the rifle's maximum fill pressure. Close the cylinder valve and bleed the pressure from the hose before removing the fill probe. Check the hose and seals regularly for wear, and only use clean, dry breathing air of diving quality.