Wolverine MTW Billet Gen 3 Tactical XB 14" HPA

Wolverine MTW Billet Gen 3 Tactical XB 14" is the longest model in the series, with the long 380 mm inner barrel for players who want range and accuracy in woodland and open terrain. It is 815 mm long and weighs approx. 2120 g. XB stands for the two most important upgrades: the new INFERNO XTS engine and the BLINC Bluetooth FCU, so you can set up the rifle from your phone.

The MTW is HPA-powered, so there is no gearbox, spring or piston to wear out. You get the same velocity shot after shot – also in winter, when gas guns lose power. The rifle is supplied set to approx. 120 m/s with 0.20 g BBs, and velocity is adjusted at the regulator, so it can be set to your site's limit. Pistol grip, stock and trigger are real-steel compatible, so they can be swapped for parts of your choice.

Inferno XTS, BLINC and billet receiver

What defines the Tactical XB 14":

• INFERNO XTS HPA engine: Extended stroke with separate nozzle and poppet gives stable airflow and fast response, and because there are no gears or piston, there are far fewer wear parts than in an AEG.
• BLINC Bluetooth FCU: Fire modes, dwell and rate of fire (approx. 5–35 rounds/sec) are adjusted via app without stripping the rifle – semi and full auto can be programmed to suit your site's rules.
• Gen 3 billet receiver and Invictus MK-1 rail: CNC-machined M4 receiver set in aluminium and a 13" M-LOK rail with a Picatinny top rail for sights and M-LOK for grips, lights and laser.
• 380 mm inner barrel and standard hop-up bucking: 14.5" outer barrel with a 1045 steel flash hider and 14 mm CCW (−) thread. The hop-up uses a standard AEG bucking, so it is easy to replace and upgrade.
• Empty mag detection and real-steel parts: The rifle stops when the magazine is empty with PTS EPM-MTW magazines, and standard M4 AEG magazines can also be used. Premium pistol grip with built-in filtered air line, heavy-duty milspec stock and T5 curved trigger.

Maintenance and safety

• HPA tank, regulator and FCU battery are not included. The rifle runs at approx. 80–140 psi – if you are new to HPA, get in touch and we will help you find the right setup, and our workshop in Aulum, Denmark can set it up for you.
• Check velocity with a chronograph before you play, and adjust the regulator to your site's limit. Recommended BB weight is 0.28–0.30 g, e.g. Hank Tactical BIO.
• Shut off the air, disconnect the air line and FCU battery after use, and empty the magazine before putting the rifle away.
• Always wear approved eye protection, and store the rifle out of reach of children.