Hank Tactical Regulator + Line

The Hank Tactical Regulator + Line is a compact HPA regulator supplied with a 40" (1010 mm) line. The regulator screws onto your HPA tank and brings the high tank pressure down to a working pressure that an HPA engine or a gas gun with an HPA adapter can run on.

The regulator is about the size of Polarstar's regulators, so it takes up little space on the tank and is easy to place in a pouch, in the stock or on your body. A stable working pressure is essential in an HPA system: the regulator is what keeps velocity consistent from shot to shot, whether the tank is full or almost empty. With the line included, all you need is a tank and a gun to get started.

Compact regulator with 1010 mm line

What you need to know about the set:

• Compact size: About the size of Polarstar's regulators, so tank and regulator take up less space than with a traditional large regulator.
• Single output: The regulator has one output for one line and one gun – the simple setup for most players.
• 40" line included: 1010 mm gives room to carry the tank on your body or in a pouch and route the air to the gun.
• Stable working pressure: The regulator holds the pressure steady throughout the tank, so velocity does not drop as the tank empties.
• Ready to use: Regulator and line in one pack – add an HPA tank and, for example, a Hank Tactical HPA Coil Line if you prefer a coiled line.

Maintenance and safety

• Always close the tank and bleed the system of pressure before disconnecting the line and regulator.
• Keep threads and O-rings clean, and check the line regularly for wear, kinks and leaks.
• Adjust the pressure gradually, and check velocity with a chronograph after every change so you stay within site limits.
• If you are unsure about the setup, our workshop in Aulum, Denmark is happy to help.